Tensile Behavior Analysis on Different Structures of 3D Glass Woven Perform for Fibre Reinforced Composites

Dynamic mechanical analysis and creep - by using Findley and Burger's methods - tests were performed aiming to evaluate the viscoelastic properties of the composites, in

The morphologies of the 20° testing specimens (figure 12(a)) un- der different strain rates shows that the higher the strain rate, the more serious the damage of the testing

Não há margem para dúvidas de que os trabalhadores serão considerados titulares de créditos sobre a insolvência, cfr. 150 Neste sentido, MARIA DE FÁTIMA RIBEIRO,

On the other hand, the silicene is constituted by a layer of atoms also forming a honeycomb atomic structure, which is obtained from the three-dimensional (3D) silicon and has sp

he objective of this study was to process and characterize multifunctional composites, based on epoxy resin/glass iber (GF) woven fabric prepreg and CF/Ni veil, a non-woven material,

Finite Element Validation on Adhesive Joint for Composite Fuselage Model A novel fabrication miniature composite fuselage structure consisted of a woven composite laminated with

tools ( 3D eraser , 3D digger and 3D clipper ) following the virtual hand interaction technique, using different devices (conventional and 3D mouse) as well as one

Tais autores, mormente Silva, são protagonistas dos Congressos Internacionais de Pedagogia Social e da Associação Brasileira de Educadores Sociais – ABRAPSocial (cf. Eles reiteram