ALL OPTICAL IMPLEMENTATION OF HIGH SPEED AND LOW POWER REVERSIBLE FULL ADDER USING SEMICONDUCTOR OPTICAL AMPLIFIER BASED MACH-ZEHNDER INTERFEROMETER
Texto
Imagem
Documentos relacionados
Independentemente da possibilidade de a escolha se situar em diferentes planos mentais 3 , não exclusiva de estudantes brasileiros 4,5 , estudos nacionais
to the fundamental issue of surface plasmon polaritons (SPP’s) coupling among spatially separated graphene sheets applied in a 1x2 interferometric device; for the
Changes in the absorption coefficients were measured in real time using different wavelengths from an Ar-ion laser, and the potential of these materials for 3D optical storage
Reversible logic c ircuits have the same number of inputs and outputs, and have one-to-one mapping between vectors of inputs and outputs; thus the vector of
The new logic structure presented in Fig.2.Fig.6 presents a full adder designed using SR-CPL logic to obtain xor/xnor gates, pass transistor based multiplexer to get So and Co
Experimental results of data processing in the studies using full-field optical coherence tomography system based on the Linnik micro-interferometer are given with subsequent
This can be done if the quantum cost and garbage output value of the digital circuits should be reduced which can only be possible by using reversible logic gates.. Peres
estudo.. No caso das CEC CD106+ verificou- se que existe uma ligeira correlação com o factor VIIIc, sendo o coeficiente de correlação, r, de 0,480 no entanto não é