Analysis of Quenching Parameters in AISI 4340 Steel by Using Design of Experiments

In this investigation a DoE (Design of Experiments) analysis of distortion for a typical manufacturing process of pre-straightened, cold drawn and induction hardened AISI

In this context, the purpose of this study is the microstructural characterization of the surface of specimens of AISI 4340 hardened steel, submitted to grinding process

This article examines the effect of prolonged time of holding at the temperature of 620 0 C on the processes of secondary phase precipitation and mechanical properties of

Performed tests have shown that application of phosphorus in form of CuP10 and AlSr10 master alloy as an inoculant gives positive results in form of refinement of primary crystals

Descriptive statistics for measuring the surface area the primary precipitates of intermetallic phases IM_W\ κ I (Sap_IM_W\ κ I, μ m 2 ) depending on the annealing time ( τ _ia,

Because of the increas- ing the speed of the decomposition of the anhydrite, together with the growth of the temperature of casting the bronze to the plaster mould, the gases

The structure of the remelting zone of the steel C90 steel be- fore conventional tempering consitute cells, dendritic cells, sur- rounded with the cementite, inside of

social assistance. The protection of jobs within some enterprises, cooperatives, forms of economical associations, constitute an efficient social policy, totally different from