• Nenhum resultado encontrado

Rev. IBRACON Estrut. Mater. vol.9 número6

N/A
N/A
Protected

Academic year: 2018

Share "Rev. IBRACON Estrut. Mater. vol.9 número6"

Copied!
9
0
0

Texto

Loading

Imagem

Table 1 – Consumption of materials for 1 m 3  of concrete
Figure 1 – Typical graph of apparent  mass increase as a function of
Figure 3 shows the relative compressive strength charts in function  of time.
Table 3 – Compressive resistance (MPa) for REF, SSA5% and SSA10% mixture
+2

Referências

Documentos relacionados

Within this context, this paper aimed to investigate the applica- tion of 3D microtomography and SEM techniques to analyze the distribution and interaction of iber hybrid

The dimensionless index I sb ( I v 4 ) which relates the lexibility be- tween slab and beam, shows eicient representation of the results of the static response and dynamic

Observa-se, por meio da Tabela [3], que a ruptura do modelo monolítico se dá por ruptu- ra à tração do concreto na biela junto ao pilar (tração diagonal) seguindo do esmagamento

The models of the monolithic pile cap and precast pile caps with the roughened conformation of the walls of the socket and the column showed characteristic behaviors of rigid

Quanto ao Estado Limite de Serviço, é pos- sível concluir que a desconsideração da ação do vento na fase de projeto pode comprometer signiicativamente a rigidez e a esta- bilidade

ABNT NBR 6118 [12] recommends for concrete structures to check the fol- lowing ultimate limit states: loss of static equilibrium; end of the structure’s load capacity, whole or

Como não existia, para todos os modelos avaliados, especiicação do fabricante em relação ao diâmetro mínimo de armadura para o qual os espaçadores são adequados, adotou-se o

Figure 7 – Evaluation method of the design requirement: a) in chair-type spacers; b) in circular spacers.. The performance is considered satis- factory when the covering provided