[PDF] Top 20 INFLUENCE OF ALBUMIN ON GUAVA PULP POWDER OBTAINED BY FOAM-MAT DRYING

INFLUENCE OF ALBUMIN ON GUAVA PULP POWDER OBTAINED BY FOAM-MAT DRYING

... flowability of guava pulp powder obtained by foam-mat ...models of GAB, BET, Henderson and Oswin were fitted to determine the isotherms of powders ... See full document

8

Influence of process conditions on the physicochemical properties of jussara pulp (Euterpe edulis) powder produced by spray drying Influência das condições de processo nas propriedades físico-químicas de pó de polpa de juçara (Euterpe edulis) produzido po

... spray drying conditions. An inlet air temperature of 170 °C, CACs of ...results obtained in this study indicated that good quality powders with high anthocyanin contents could be produced ... See full document

13

Physical-chemical characterization of yellow mombin (Spondias mombin L.) foam-mat drying at different temperatures

... After drying, the samples were removed from the trays and slightly agitated, manually, to obtain the yellow mombin pulp ...powder. Powder samples were diluted in distilled water at 1:2 ... See full document

6

Estudo da estabilidade da espuma da polpa do Umbu (Spondias Tuberosa L.) Para secagem pelo método Foam-Mat / Study of the stability of the foam of the Umbu pulp (Spondias Tuberosa L.) For drying by the foam-mat method

... stability of the umbu pulp foams with combined additives in different concentrations at room ...time of fall of the first drop, stability and fraction of drained ...analysis of ... See full document

11

QUALITY OF CAGAITA POWDER BY FOAM LAYER DRYING METHOD AND DIFFERENT FOAMER AGENTS

... structure of β-carotene is capable of facilitating its interaction with several types of compounds, including proteins, lipids, and reactive oxygen species (Mesquita et ...levels of β-carotene ... See full document

7

Physicochemical evaluation and hygroscopic behavior of powdered guava obtained by spray drying

... The guava is one of the most popular tropical fruits, being highly accepted all over ...types of juice. Given the above, the objective of this research was to characterise atomised ... See full document

7

Secagem da polpa de goiaba (psidium guajava) da variedade Pedro Sato pelo método foam mat drying para aplicação em alimentos

... source of vitamin C, lycopene, β-carotene and phenols, which have antioxidant ...portion of guava harvested is lost before reaching the ...methods of preservation need to be used, and the ... See full document

7

Drying kinetics of atemoya pulp

... The influence of temperature increment on the drying time is expected and reported by Krasaekoopt & Bhatia (2012), who also observed reduction in the drying time with the ... See full document

6

Drying and characterization of myrtle pulp

... influenced by temperature, with gradual reduction of the times when higher temperatures of the drying air were used, for all ...The influence of the increase of ... See full document

7

Desidratação de polpas de frutas pelo método foam-mat

... the foam mat drying process of pineapple and mango pulp, as well as to evaluate the final product ...selection of fruit and additives was conducted based on density and ... See full document

100

Mathematical modeling of the foam-mat drying curves of guava pulp

... higher albumin concentration. In the drying at 75 ºC (Figure 1A), the times necessary to reach the moisture ratio of ...the albumin concentrations of 4 and 8%, respectively, ...the ... See full document

5

Isotherms and isostatic heat of foam-mat dried yellow mombin pulp

... perishable. Foam mat drying is a method that has been widely used to preserve liquid and semi-solid powdered ...aim of this study was to determine desorption isotherms and isosteric heat ... See full document

6

Concentration by Membrane Separation Processes of a Medicinal Product Obtained from Pineapple Pulp

... concentration of pineapple juice is needed to retain the bromelain activity and to standardize the composition and proteolytic ...juice by membrane separation ...the influence of pH and ... See full document

8

Influence of heartwood on wood density and pulp properties explained by machine learning techniques

... aim of this work is to develop a tool to predict some pulp properties ...e.g., pulp yield, Kappa number, ISO brightness (ISO 2470:2008), fiber length and fiber width, using the sapwood and heartwood ... See full document

10

Characterization of powder from the permeate of yacon extract by ultrafiltration and dehydrated by spray drying

... encapsulation of active components by spray drying became one of the most used methods of ...consisting of the active components, and the environment, able to protect it from ... See full document

11

Influence of Drying Treatment on Physical Properties of Pumpkin

... because of their medicinal properties (Caniço et al, ...used by many civilizations such as the Aztecs, Incas and Mayans, and only later it was brought to ...kinds of pumpkins which can vary in terms ... See full document

6

Sintering behaviour of a ZnO waste powder obtained as by-product from brass smelting

... The ZnO-rich waste is originated in brass factories, where copper-zinc metal alloy is melted at 1100˚C, or higher, and under such conditions partial zinc volatilization occurs. The zinc vapor reacts with oxygen from air ... See full document

21

Using Egg Albumin Foam to Extinguish Fires

... method of putting out fires using water can be ineffective against liquid fuel fires fed by gasoline, coal or ...protein foam (which contains only a fraction of the water used in the former ... See full document

6

Influência da maltodextrina nas propriedades de escoamento do pó da polpa de cupuaçu / Influence of maltodextrin on the flow properties of the cupuaçu pulp powder

... one of the most important fruits of the Amazon, contains an acid pulp and intense ...form of powders can be advantageous, because they reduce costs with packaging, transport, storage, ... See full document

11

Microstructures and mechanical properties of ZA27-Al2O3 composites obtained by powder metallurgy process

... Metal powder and powder mixtures were pressed at 230°C, for 45 min under the pressure of 150 ...rate of 2.4×10 -3 s -1 . The microstructures and the fracture surface of the samples were ... See full document

8