Оптимальное проектирование балок при ограничениях по прогибам Optimum desing of beams with deflection costraints
Texto
Documentos relacionados
The article briefly examines the processes occurring during the formation of cluster beams in sources of clusters, using the expansion of the gas mixture through a nozzle.. The
An optimum ML receiver was derived in order to detect two non-orthogonal m-QAM signals, with spectral overlapping, and carrier frequency separation less than the symbol rate, through
The estimates of the plot size obtained by the maximum curvature method for the grain yield, stem diameter and bixin percentage characteristics were performed on six basic units,
Greater gains in experimental precision (16%) with increases in plot size, occurred up to eight basic units (5.04 m 2 ) using seven replications.. Increasing the number of
The optimum cost of T-beam has been computed for example 1 with varying loads, span, grade of steel, grade of concrete, thickness of flange and concrete clear cover and variations
Based on the enhanced theory of plate bending that takes into account the effect of transverse shifts, the problem of optimal design of rectangular transversely isotropic
При выполнении авторами обследования этих перекрытий выяснилось, что отступая от проектного решения, которое определяло опирание мелкоразмерных ребристых плит
[r]