Effect of Air Flow on Tubular Solar Still Efficiency
Texto
Imagem
Documentos relacionados
Based on the experimental study, this paper presents the effect of mass flow rate of water, and its inlet temperature for various inclination angles of heat@pipes on heat
[27], the absorbing heat flux and releasing heat flux of the fifth endoreversible Carnot heat engine can be obtained by using the heat transfer between the working fluid and
Mathematical modeling of processes heat and mass transfer inoculator in melts allows you to identify peculiarities of the technological process, and establish influence inoculator
Fig. Homogenized heat transfer coefficient for 10.. 3) For small size of the inclusions a 1 and various values of heat transfer the equivalent heat transfer parameter
Rodriguez (1998) studied the influence of particle diameter and solid particle mass flow rate on the bed-to-tube heat transfer coefficient in a shallow fluidized bed heat
The authors considered the reduction of the volume of the dried material and, consequently, the reduction of its area available for heat and mass transfer, and showed that the ratio
For this purpose, in the current study, an analytical approach based on the Laplace method for the mathematical model of the coupled heat and mass transfer process in
Table 2 shows the heat transfer surface and the estimated values of the global heat transfer coefficient for each exchanger, as well as the estimated mass transfer coefficients