HEAT TRANSFER COEFFICIENT AND FRICTION FACTOR CHARACTERISTICS OF A GRAVITY ASSISTED BAFFLED SHELL AND HEAT-PIPE HEAT EXCHANGER
Texto
Imagem
Documentos relacionados
[27], the absorbing heat flux and releasing heat flux of the fifth endoreversible Carnot heat engine can be obtained by using the heat transfer between the working fluid and
The problem for this case solved theoritically to study the effect of heat transfer rate of various parameters such as Grashof number and Prandtl number of the fluid
Khan [24] studied the heat transfer characteristics and pressure drop condition for a ammonia with 30 0 chevron angle in chevron type plate heat exchanger and
Ahsan and Fukuhara [1] studied on a new heat and mass transfer tubular solar still and found that the heat and mass transfer coefficients can be expressed as functions of
The research reported in this paper includes the evaluation of convective heat transfer coefficient, moisture removing rate and collector efficiency for different mass
Effect of wind speed on the heat lost and heat gain of the conductor and the effect of convection heat loss on thermal rating of transmission line are
Subsequently, the heat transfer coefficient, overall heat transfer coeffi- cient, friction factor, pressure drop and pumping power for CuO/EG nanofluid calculated based on
Fig. Homogenized heat transfer coefficient for 10.. 3) For small size of the inclusions a 1 and various values of heat transfer the equivalent heat transfer parameter