Analysis of energy processes in pulse converters of AC electric power

Though such techniques posses the ability of controlling large amount of power economically, it has been to found to suffer from inherent disadvantages such as retardation of

The mathematical model developed helps to study processes during start and steady-state operation of the pump mechanism driven by means of high-voltage motor and

electromagnetic and electrostatic conversion due to the high energy density that the. piezoelectric materials

[14] V.ă OlОsМСuФ,ă R.ă BoУoТ,ă G.ă GrТvaă anНă F.ă ProПumo,ă “Duală ТnvОrtОr -fed traction drive аТtСă DCă sourМОsă poаОră balanМТnРă basОНă onă sвnМСronТгОНă PАM,”ă

In general, the DM noise is related to switching current and the CM noise is related to capacitive coupling of switching voltage with Line Impedance Stabilizing Network (LISN),

The boost converters experimental test is carried out in the following conditions: During the super capacitors discharge, the batteries current reference (Ibatref) is fixed at 13A

2(b), the sources and the battery all are installed in one place and are connected to a main ac bus bar, through appropriate power electronic devices, before being connected

After that, considering the number of vehicles in each neighborhood of the city of Curitiba and which bus of the electric system would be affected by this amount of vehicles, taking