• Nenhum resultado encontrado

Rev. Esc. Minas vol.66 número2

N/A
N/A
Protected

Academic year: 2018

Share "Rev. Esc. Minas vol.66 número2"

Copied!
1
0
0

Texto

(1)

139 REM: R. Esc. Minas, Ouro Preto, 66(2), abr. jun. | 2013

Esta edição especial da REM publica os 12 entre os melhores artigos apresentados na décima edição do Seminário Brasileiro do Aço Inoxidável, evento prestigiado com um total de 35 artigos, os quais podem ser consultados através do link http://www.abinox.org. br/biblioteca-tecnica-seminario-brasileiro-2010.php. O X SEMINÁRIO BRASILEIRO DO AÇO INOXIDÁVEL – INOX 2010 – foi organizado como um “evento internacional”, para comemorar a marca de dez eventos. Assim sendo, todos os artigos são publicados em inglês, pois, de outro modo, a desejada internacionalização do evento não ocorreria de fato. O anseio de lançar uma edição comemorativa internacional surgiu quando da organização do nosso Seminário anterior, ocorrido no ano de 2008 – o INOX 2008 – quando foram avaliados o histórico e a tradição do evento, bem como sua representatividade no segmento ao qual ele está relacionado.

Os patrocínios das empresas CBMM, GERDAU e CNPq foram fundamentais para a publicação da coletânia dos artigos do INOX 2010 – a quem expressamos nossos since-ros agradecimentos. Esperamos que esta iniciativa seja futuramente apoiada por um número muito maior de empresas, o que garantirá um maior número de artigos publicados e uma data de publicação bastante anterior. Deixamos aqui o nosso agradecimento aos autores dos trabalhos da presente publicação, que não se realizaria sem os especiais esforços do editor da REM, Dr. Jório Coelho.

Comissão Organizadora

X Seminário Brasileiro do Aço Inoxidável

This special edition of REM publishes 12 of the best papers presented at the Tenth Bra-zilian Stainless Steel Seminar. This was a prestigious event with a total of 35 accepted papers that can accessed at” http: www.abinox.org.br/biblioteca-tecnica-seminario-brasileiro-2010. php. The X BRAZILIAN STAINLESS STEEL SEMINAR - INOX 2010 - was organized as an "international event", to celebrate a ten-event milestone. Accordingly, all papers were published in English, otherwise the desired internationalization of the event would not have occurred. The yearning to publish a special international commemorative edition of REM came about when the organizers of our previous Seminar, held in the year of 2008 – INOX 2008 –evaluated the history and tradition of the event, as well as their representation in the segment to which it is related.

Sponsors like CBMM, CERDAU and CNPq were fundamental for the publication of the articles found in INOX 2010 – to which we express our sincere thanks. We hope this initiative will be supported by a much larger number of companies in the future, ensuring a greater number of published articles and an earlier publication. We leave here our thanks to the authors of the papers of this publication, the likes of which could not have happened without the special efforts of REM´s editor, Dr. Jório Coelho.

Organizing Committee X Stainless Steel Brazilian Seminar

Editorial

Editorial

Ailiada à

Referências

Documentos relacionados

The hardness map of the welded joint is shown in Figure 4. An overall increase of hardness is observed due to reined microstructure on the SZ. The ad- vancing

Specimens of duplex steel heat treated at 475 o C for 4 h and 8 did not show any detectable decrease of corrosion resistance in anodic polarization and critical pitting

(A) 127.0 mm diameter bar of conventional production heat (H-7263/Sample 651) that failed in passing in the corrosion testing ASTM G-48 showing the presence of precipitates in

Differently from the Low Tem- perature Plasma Nitriding Treatment of austenitic stainless steels, where up to 35 at% of N can be introduced in austenite in solid

Figure 2 reveals that the addition of indole to the concentrations studied in- creases the current density (j) in the region of the anodic curve studied, suggesting

The 10Ni alloy showed high magne- tization, indicating the presence of strain induced martensite, since this phase is the only ferromagnetic present in austenitic steels.

• The sensitivity of geosynthetic inter- faces to the surface wear process was closely dependent on the particular type of geomembrane component of the interface: in contact

A test database of 323 cold-formed steel columns concentrically loaded with plain and lipped C-section was assembled, and test-to-predicted statistics were obtained for