Science Arts & Métiers (SAM)

Results and discussion Figure 1: Ranking of the situations based on peak values of right and left handrim total force during propulsion Results based on total force are presented on

2k 1A B1 D2L TEM = w L 3 where kw1 is the winding factor, AL A/m is the stator rms electric load, B1 T is the peak value of the fundamental of the magnets flux density at the stator

CONCLUSION The Polynomial Chaos Expansion has been successfully applied to Finite Element electromagnetic field simulation to evaluate the impact of material properties uncertainties

The different works dealing with the influence of aging on the ultimate properties which were achieved on rubber materials Ben Hassine et al., 2014; Colin et al., 2019; Nait Abdelaziz

Discussion 199 Chemical characterizations of a GO electrical steel after oxidizing and nitriding show that the kinetics 200 of nitrogen adsorption and diffusion highly depends on

 Focus on Life Cycle Assessment • USEtox model • Limitations • Case studies  Impact of nano-particules  Impact of Chromium • Conclusion April 2018 III International

2nd International Conference on Mechanics of Composites Influence of variability in geometric and material parameters on the damping properties of multilayer structures Fessal KPEKY

Compared to DGEBA and TGAP spectra, those of DGEBA/DETA and TGAP/DETA polymers exhibit two new bands: i broad absorption bands around 3355 cm−1 for DGEBA/DETA and 3330 cm−1 for TGAP/