glass fiber-reinforced polymer
Estudo do comportamento de elementos de conexão em GFRP (Glass Fiber Reinforced Polymer) para utilização em painéis sandwich de betão
... Steel Fiber Reinforced Self Compacting Concrete (SFRSCC), an internal layer of insulating material and GFRP (Glass Fiber Reinforced Polymer) ...Steel Fiber ...
226
Estudo da ligação entre componentes estruturais de GFRP (glass fiber reinforced polymer) e componentes estruturais em betão
... Perda de rigidez justificada pelo aparecimento de uma fenda na interface argamassa-GFRP (Figura 4.41 a). Após atingir a carga máxima, o provete perde carga sem que haja recuper[r] ...
169
Infl uence of Temperature Cycles on Bond between Glass Fiber-Reinforced Polymer and Concrete
... The GFRP laminates had the relative mass content of resin and fi ber determined by submitting samples to high temperature, around 600°C (1112°F), in an oven and comparing their weights before and after “burning” the ...
12
Performance of polymer gears reinforced with sisal woven rovings
... Natural fiber composites such as sisal and jute polymer composites became more attractive due to their high specific strength, lightweight and ...sisal–jute fiber with glass fibers improved ...
8
A case study undertaken recycling & reuse of glass fiber reinforced thermoset polymer wastes of composite materials industry
... Abstract Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: cross- linked nature of thermoset resins, which cannot be remoulded, and complex composition ...
8
Polímeros vol.25 número1
... of fiber were used for the comparsion purpose to fabricate the IPN reinforced composite ...E-Glass fiber (350 gsm) and another one Carbon fiber (350 gsm) both the fibers were used as ...
9
Mat. Res. vol.8 número3
... 2:1. Fiber reinforced epoxy polymer concrete were prepared in the same way as plain epoxy polymer concrete, with the incorporation of 1% and 2% in mass of chopped glass and carbon ...
4
Thermal expansion behavior of co-extruded wood-plastic composites with glass-fiber reinforced shells
... The thermal expansion behavior of laminated composites can be analyzed following an approach based on classical lamination theory, CLT (e.g., Hsueh and Ferber 2002; Jones 1975; Halpin and Pagnao 1969). Halpin and Pagano ...
13
Friction riveting of aluminium alloy 6056-T6 with short-glass-fiber-reinforced polyamide 6 composite
... Friction Riveting (FricRiveting) is a relatively new joining technique for metal- polymer hybrid structures. This master thesis was carried out to investigate the FricRiveting process for polyamide 6 ...
151
Nonlinear Analysis of Reinforced Concrete Column with Fiber Reinforced Polymer Bars
... Such techniques are also most attractive for their fast execution and low labour costs. FRP composite products for structural strengthening are available in the form of prefabricated strips, procured shapes or uncured ...
11
Matéria (Rio J.) vol.22 número2
... carbon fiber, an E-glass fiber, and a thermoplastic ...The glass fibers in the hybrid rods display a braided structure of the 2/2 twill ...carbon fiber, 23.2–39.8% for the glass ...
10
Chemical Analysis of Emu Feather Fiber Reinforced Epoxy Composites
... natural fiber like plant fibers and animal ...as fiber have been tested for chemical ...varying fiber loading (P) of „emu‟ feathers ranging from 1 to 5 and length (L) of feather fibers from 1 to 5 ...
6
Characterization of high density polyethylene (HDPE) reinforced with banana peel fibers
... After the washing, shown from Fig. 4(d) to (f), the WBF presented a rough surface due to the superficial layer removal, with an undefined format particles, as well as particles that are smaller than untreated ...
15
Rev. IBRACON Estrut. Mater. vol.5 número5
... of reinforced concrete, the application of CFRP is interesting, and has being accepted, owing the advantages, notably those related to the high resis- tance/weight ratio, immunity to corrosion, facility and ...
15
CLME CEMENT BASED FIBER REINFORCED MORTAR THE FIBER INFLUENCE ON THE MORTAR PERFORMANCE
... In the present paper, the behavior of cement-based mortars reinforced with waste fibers is described. An experimental work is presented which main objective is the evaluation of the influence of the percentage of ...
2
Performance Assessment of Waste Fiber Reinforced Mortar
... Regarding the physical parameters (Table 4 and Figure 3), the capillary absorption of cement- based mortars increases with the increase of fiber content while in lime-based mortars same trend cannot be identified. ...
6
Investigations On The Influence Of Process Parameters On Damage Factor During Drilling Of Glass Fiber Reinforced Composites
... At 110 0 and the fibers to be oriented at random to achieve minimum damage factor at the entry and exit of the holes. When the spindle speed kept at high level that is at 450 rpm, the fibers are cut rapidly, the fibers ...
5
Behavior of fiber reinforced mortar composites under impact load
... the fiber-mortar contact surface depends on their ...as: fiber shape, surface roughness of fibers, fiber porosity and possibility of propagation of cement crystals into fibers, fresh mortar ...
13
Rev. IBRACON Estrut. Mater. vol.3 número1
... This paper corresponds to the second part of a work intended to evaluate the design models of reinforced concrete structures strength- ened with Carbon Fiber Reinforced Polymers (CFRP). The shear ...
13
Strength analysis of filament-wound composite tubes
... of fiber reinforced composite struc- tures until the initial failure is significantly more com- plex than the calculation of structures of isotropic mate- ...
7