Wear resistance
Top PDF Wear resistance:
Abrasive Wear Resistance of the Iron- and WC-based Hardfaced Coatings Evaluated with Scratch Test Method
... Abrasive wear is one of the most common types of wear, which makes abrasive wear resistance very important in many ...abrasive wear conditions, with wide range of applicable filler ...
5
Effect of Contact Temperature Rise During Sliding on the Wear Resistance of TiNi Shape Memory Alloys
... to wear in sliding, fatigue, abrasion and erosion modes [ ‐ ...high wear resistance of TiNi alloys has generally been attributed not to the increase in hardness but to the pseudoelastic nature of the ...
11
Wear Resistance of Nano Alumina Containing SiO2-B2O3-Na2O Glass-Ceramic on Steel Substrate
... sliding wear tests were carried out using pin on disk ...mg wear rate by 30N load at 100 m for nano alumina bearing coats. The wear resistance increased by a factor of ...
10
EFECT OF PLASMA IMMERSION ION IMPLANTATION TREATEMENT IN THE WEAR RESISTANCE OF Ti-6Al-4V ALLOY
... of wear resistance of Ti-6Al-4V alloy after plasma immersion ion implantation (PIII) in different immersion ...The wear analyses were made by pin-on-disk process, where the lost volumes and ...
5
Wear Resistance of High-Volume Fly Ash Concrete
... Wear resistance of high-volume fly ash concrete (HVFA) intended for pavement applications is presented in this ...and wear resistance. Test results indicated that wear resistance ...
16
Mat. Res. vol.6 número1
... A precision ball-crater apparatus was used to perform both thickness measurements and abrasive wear resistance tests. It helped also to give a visual evaluation of adhesion of the coatings, since poor ...
4
Cerâmica vol.61 número357
... erosion wear. The wear properties of a ceramic can be improved not only by controlling its material characteristics but also by controlling the fabrication process, which deines the material’s ...erosive ...
16
Matéria (Rio J.) vol.21 número1
... The wear and friction behaviors of borided steels are broadly dependent on the following surface and boriding conditions: boriding time and temperature, chemical composition, mechanical properties, physi- cal ...
11
Matéria (Rio J.) vol.21 número3
... Wear resistance and Frictional stability are key performance requirements for brake ...and wear resistance. Friction-wear properties of the reinforced samples were investigated on the ...
10
Automation in fault detection using neural network and model updating
... suggested that lhe mixed alumina product had a higher eraLer wear resistance tban DBC50. this difference accountcd for the fact lhat the CC650 fa.ilcd after 30 seconds of cut[r] ...
167
Determination Of Longevity Of Teeth In Buckets Of Loading Equipment In Coal Mines - A Case Study
... The wear resistance property is an important characteristics of intrinsic quality of mining tools; however, it is influenced by rock mineral composition, hardness and grain size, rock strength and hardness, ...
11
Mat. Res. vol.12 número2
... This work intends to contribute to the development of polymer coatings by utilizing the thermal spray of recycled PET for the im- provement of the tribological behavior of carbon steel piping. Here, we describe a study ...
6
REM, Int. Eng. J. vol.70 número3
... the wear resistance, the second sample of each experiment was submitted to a micro-abrasive wear test according to the methodology pro- posed by Rutherford et ...abrasive wear test, which ...
6
RGO, Rev. Gaúch. Odontol. vol.63 número3
... The various brands of artiicial teeth available on the market have substantially different purchase prices, as was the case with the teeth tested in the present study. According to public information provided by the ...
8
J. Appl. Oral Sci. vol.13 número2
... the wear resistance of five commercial compomers, Dyract (Dentsply), Dyract AP (Dentsply), Compoglass F (Ivoclar/ Vivadent), Freedom (SDI), F2000 (3M ESPE), compared to the resin composites Z100 (3M ESPE) ...
5
Mat. Res. vol.11 número3
... low wear rate, supplying the brake system with a high ...their wear resistance, thermal diffusivity and ...and wear of friction materials 3 ...
6
Mat. Res. vol.20 número5
... Electrodeposited hard chromium coatings are widely used in several areas where wear resistance must be a fundamental property. Only a few microns’ thick layer deposited on a varied range of substrates is ...
9
Mat. Res. vol.17 número6
... the wear resistance, friction coeficient and load capacity of each ...sample. Wear resistance was estimated via weight loss the coated ...
4
Mat. Res. vol.4 número4
... abrasive wear of four different types of resins against one abrasive enamel, Hirano et ...abrasive wear strength and a more stable color than resin; however, it was also more prone to ...abrasive ...
6
J. Appl. Oral Sci. vol.17 número5
... abrasion wear resistance of 7 commercial brands of artificial denture teeth (BIOLUX, TRILUX, BLUE DENT, BIOCLER, POSTARIS, ORTHOSIT, GNATHOSTAR), opposed to metallic antagonists (M – nickel-chromium alloy) ...
6