Numerical simulation of boundary heat flow effects on directional solidification microstructure of a binary alloy

NUMERICAL SIMULATION OF SHALLOW WATERS EFFECTS ON SAILING SHIP "MIRCEA" HULL1. Petru Sergiu Ș

Motivation of investigating the influence of the number of finite elements on the results of sensitivity analysis was finding out whether the selected method depends of the

This study show the numeric simulation by the finite difference analysis of the temperature distribution and cooling process of aluminum in green sand mould, during 2 hours

The effects of Rayleigh number Ra and radii ratio R on the time evolution of velocity and temperature distributions are investigated for pseudo plastic and dilatant fluids

© 1994-2007 China Academic Journal Electronic Publishing House.. All

This model will allows to obtain a friction law at the interface according to normal contact stress, the roughness of the tool, the workpiece material yield stress and local

size class, elongation and total copper phases ratio all in correlation to copper content. Correlations of average number of copper particles, theirs average area, as well

For velocity 60 m/s, the heated tube reports lowest temperature increment with the 15 mm long spacer that is located at 1.5 mm from the tube; for velocity 15 m/s this is seen in