Vibrations of an Elastic Orthotropic Unmoment Open Cylindrical Shell with Variable Curvature and Free End, when Other Edges are Rigid–Clamped
Texto
Documentos relacionados
In order to study the free edge effect on the laminate strength, one group of test specimens was prepared with machined edges and another with molded edges for each family
Results obtained for frequency of bending mode, shear mode and thickness stretch mode of free vibra- tion of simply supported orthotropic square and rectangular plates are compared
Hryniewicz [17] investigated the vertical, horizontal and rocking vibrations of a rigid strip foundation on the surface of an elastic half-space and evaluated the numerical results
Therefore, the exact solution to free vibration of elastically restrained Timoshenko beam on an arbitrary variable elastic foundation using Green Function is pre sented
Figure 8: Coordinates from the clamped edge, and angle of rotation along the cantilever beam composed of linear- elastic material with Swift isotropic hardening: end of loading ( P
Table 2 shows the frequency analysis in free vibrations of a three stepped cylindrical shell with different axial lengths and SD-SD ended supports obtained by using VWM and the
Hierarchical finite element method; liquid; cylindrical rigid tank; free vibration; free surface; sloshing; displacement based.. Free Vibration Analysis of a Liquid in a
Using the third-order shear deformation theory (TSDT), an ana- lytical solution for deformations and stresses of axisymmetric clamped-clamped thick cylindrical shells made