HEAT TRANSFER ENHANCEMENT OF SMALL SCALE HEAT SINKS USING VIBRATING PIN FIN

Based on the experimental study, this paper presents the effect of mass flow rate of water, and its inlet temperature for various inclination angles of heat@pipes on heat

The utilized numerical procedure for de- termination of heat transfer processes in the TES is very sensitive to the storage material thermo-physical properties, hence the exact

[27], the absorbing heat flux and releasing heat flux of the fifth endoreversible Carnot heat engine can be obtained by using the heat transfer between the working fluid and

Fig. Homogenized heat transfer coefficient for 10.. 3) For small size of the inclusions a 1 and various values of heat transfer the equivalent heat transfer parameter

Abstract - This study analyzed the influence of the following parameters: overall volumetric heat transfer coefficient, coefficient of heat loss, drying rate, specific heat of

The best flow configuration is (0, 1) for the two- layered MCHS, (0, 1, 1) for the three-layered MCHS, and (0, 1, 1, 1) for the four-layered MCHS, which can reduce thermal resistance

Subsequently, the heat transfer coefficient, overall heat transfer coeffi- cient, friction factor, pressure drop and pumping power for CuO/EG nanofluid calculated based on

Khan [24] studied the heat transfer characteristics and pressure drop condition for a ammonia with 30 0 chevron angle in chevron type plate heat exchanger and