• Nenhum resultado encontrado

Effect of a Polymeric Protective Coating on Optical and Electrical Properties of Poly(p-phenylene vinylene) Derivatives

N/A
N/A
Protected

Academic year: 2017

Share "Effect of a Polymeric Protective Coating on Optical and Electrical Properties of Poly(p-phenylene vinylene) Derivatives"

Copied!
6
0
0

Texto

Loading

Imagem

Figure 1: Current versus electrical ield of ITO/OC 1 OC 6 -PPV/Al, neat and coated with PVA.
Figure 4: Normalized absorbance decay for the OC 1 OC 6 -PPV cast ilm and OC 1 OC 6 -PPV cast ilm coated with PVA, irradiated with white light
Figure 5: Conductivity values of the OC 1 OC 6 -PPV cast ilm and OC 1 OC 6 -PPV cast ilm coated with PVA, measured in an interdigitated electrode and irradiated with white light

Referências

Documentos relacionados

RESUMO: O estudo teve por objetivo levantar diferentes formas de jogar utilizando tabuleiro, com vistas a contribuir como conteúdo das aulas de Educação Física Escolar.. Os

transmittance and low electrical resistivity, the effect of the Nb-doping and the pulsed bias on the electrical and optical properties of oxygen deficient Ti 2 O 3 thin

“Structure, optical, and electrical properties of indium tin oxide thin films prepared by sputtering at room temperature and annealed in air or nitrogen.” In: Journal of applied

On the other hand, the silicene is constituted by a layer of atoms also forming a honeycomb atomic structure, which is obtained from the three-dimensional (3D) silicon and has sp

In P 1, because of the electrons barrier being too low compared with holes one, the carriers densities are accumulated at cathode/ organic layer interface, leading to a

The role played by the firing process in the film preparation and the crystallite size of HA and BTO on the dielectric constant and structural properties of the films are discussed..

7 one can notice that the scanning electron photomicrograph of the films revealed that the presence of the glass is leading to a spherical morphology for the synthesized particles

In the second procedure, the samples were prepared without the presence of the organic phase, and we obtained a higher dielectric constant ( K ⫽ 7370) with high loss ( D ⫽ 0.2) at