Texto
3(2011) 131
ERRATUM TO:
Fuzzy Logic for Structural System Control, vol. 9, n. 1, p. 111-129, 2012.
This paper is single authored by Herbert Martins Gomes. The other originally cited co-author, Cesar Miguel Almeida Vasques, states
that has no contribution to the above mentioned article.
Marc´ılio Alves Editor-in-Chief
Rog´erio Marczak and Heraldo da Costa Mattos Associate Editors
Latin American Journal of Solids and Structures
www.lajss.org
Documentos relacionados
However, if multiple load cases are to be handled by a traditional optimization strategy, the resulting optimal design would be even heavier than the one obtained through the
This method avoids the limitations of the load control and displacement control methods in tracing the equilibrium path; (c) Chan [7] proposed the minimum residual displacement
Novel equivalent function for deadzone nonlinearity: applied to analytical solution of beam vibration using He’s Parameter Expanding
The results, presented so far, point out that the procedure developed to obtain the transient displacement solution of half-space problems subjected to stress loadings is very
A proposal on the effective thickness is concluded in order to estimate the ultimate strength and explore the post-buckling behaviour of pitted steel plates under uniaxial
This paper presents the effect of nonlocal scaling parameter on the coupled i.e., axial, flexural, shear and contraction, wave propagation in single-walled carbon nanotubes (SWC-
Four types of honeycomb specimens with different in-plane orientation angles were designed in combined shear-compressive tests for investigating the influence of the
The results are compared to the ones obtained with the FEM using linear elements and a Hierarchical Finite El- ement Method (HFEM) using higher order
