J. Braz. Soc. Mech. Sci. & Eng. vol.28 número1
Texto
Imagem
Documentos relacionados
The present work experimentally investigates the role of cryogenic cooling by liquid nitrogen jet on tool wear and surface finish in plain turning of C-60
11 and 15 shows that similar results are obtained for the simultaneous estimation of D(x) and µ (x), by using either the conjugate gradient method or the hybrid
Yu and Tso (1995) concluded that with the new multi fiber probe it is not possible to measure inclination of gas- liquid interface, but the probe increases the
The concepts of linear and angular momentums are used to formulate the rigid body dynamical equations of motion which are expressed in terms of the rectangular
Experimental data at various mean test temperatures show the thermal conductivity variation with density for coconut fiber and sugarcane fiber followed
Figure 4 presents the polynomial desired trajectory, the response to this trajectory using the cascade controller with friction compensation and the tracking error
We can see that when the hyperbolic mirror equation is used together with the single center of projection propriety we can obtain panoramic images free of
Thus, in this paper, the goal is to use linear matrix inequalities (LMIs) techniques to design an active state- feedback control to suppress flutter.. Due to