Lat. Am. j. solids struct. vol.13 número10
Texto
Imagem
Documentos relacionados
The maximum vertical displacement and energy consumption of composite laminates is minimized for different plate aspect ratios, ply angles, number of layers, boundary
Figure 9: Sensor configuration: Through-thickness variation of axial stresses in the sandwich beam.. a) Clamped-Free (C-F) b) Simply Supported (S-S) Figure 11:
The fuzzy stochastic analysis algorithm encompasses a fuzzy analysis and a stochastic analysis to deal effectively with the fuzziness and randomness characteristics of
Crash testing of bridge barriers is performed with a series of full-scale impact tests that follow the recommended guidelines of the NCHRP Report 350 or MASH to appraise
In this investigation, the analytical approach called Homotopy Analysis Method (HAM) has been successfully applied to find the most accurate analytical solution for the
The present work generalizes the reflection at the free surface studied by Sharma and Saini (2012) to the reflection-refraction phenomenon at the plane interface between
We presented Influence of different parameters such as initial maximum amplitude and aspect ratio on nonlinear normalized frequency.. It is shown that mode number has a significant
This finding shows that the boundary conditions significantly affect the frequency method for the strand of the anchor span in suspension bridges, and the boundary conditions of