J. Braz. Soc. Mech. Sci. & Eng. vol.30 número4

The adopted experimental procedure, by measuring the temperature underneath the carbide insert and using the gradient to calculate values near the rake face, in

Of the five lubricants studied, the results indicated that the solid polyurethane film yielded the best performance, promoting a more homogeneous distribution profile of the

The present work addresses some modelling aspects of polymer melt flow using finite volumes (FV) and finite elements (FE) schemes, such as computation of the FV

In this context, based on the project of Shanghai Bridge over Yangtse River, this paper presents a 1:60 scale sectional model study at TJ-1 wind tunnel and a summary of

The Finite Element Method is used to discretize the system and two probabilistic approaches are considered to model the uncertainties: (1) the stiffness of the torsional spring is

To eliminate those cost collisions, the cost of a given solution can be modified in order to reflect how close this solution is to having a non-placed small item fitted in the

Saffman, 1992 in his superb and complete monograph on vortex dynamics, treats the problem in depth, but attributes minor practical importance to its use when,

For the analysis of the flow around a large amplitude heaving cylinder the body boundary conditions cannot be transferred from the actual position to the