CPW fed Inverted U-Shape Microstrip Patch Antenna for WLAN/WiMAX Applications
Texto
Imagem
Documentos relacionados
The computer simulation results show that the antenna can realize wide band characters with each band having good impedance bandwidth (VSWR ≤ 2) for all the three
The software used to model and simulate the Sierpienski & Crown Square Fractal Shapes Slotted Microstrip Patch Antenna was IE3D, it can be used to calculate
The three proposed antennas are simulated using Sonnet software, under the same conditions and results compared with the conventional rectangular patch antenna, and the shape with
A novel circularly polarized coaxial fed rotated stacked patch antenna is proposed and its performance characteristics are presented in the current work.. The
These can be explained due to the fact that the antenna gain is optimized by the resonant frequency, but in this paper the rectangular patch and triangular slot
the paper is organized as follows: Section II explains the design procedure of an aperture coupled microstrip patch antenna (ACMPA) covered by EBG structure and section III
In this paper,study and survey of microstrip antenna elements is presented, with emphasis on theoretical and practical design techniques and material used, as
In this paper, an attempt has been made to reduce the size of microstrip antenna, with improved bandwidth, gain without any complexity in design by using inverted patch