J. Braz. Soc. Mech. Sci. & Eng. vol.27 número2
Texto
Imagem
Documentos relacionados
The method described here is thus suited to radiative transfer problems characterized by different layer types and with a left boundary condition expressed as a
Calculations show that the stagnation point heating on power law leading edges with finite radius of curvature follows the same relation for classical blunt body in continuum flow; it
Using a pattern classifier implemented by neural networks it is possible to classify patterns of ultrasonic signals from welds by the pulse echo technique and by the
The idea was to determine the distribution of temperature, heat flux, thermal gradient, cooling curves in the cast metal, and heating or/and cooling in the molds
resin transfer molding (RTM), resin film infusion (RFI), and hand lay-up, the problem of void formation is also related to the manufacturing process parameters such as fiber
Brazilian territory is situated on an intraplate region with low seismic activity, and so, it is important to answer an old question that remains unanswered: “Should standard building
Water in the solid phase has been employed as the storage substance due to its properties and characteristics: high melting latent heat (334 kJ/kg), melting temperature of 0°C at the
Transmission loss of a simple expansion chamber using an extended tube length of 0.1 mm; TMM results (dashed line) and experimental results (solid line).. Figure 6 shows