Lat. Am. j. solids struct. vol.8 número4
Texto
Imagem
Documentos relacionados
This section presents the formulation for optimum design of laminated composite tubes subjected to axisymmetric loads (internal and/or external pressure, axial force, torsional
Furthermore, for fixed values of rotatory inertia correction factor and foundation modulus, the response amplitude for the moving mass problem is greater than that of the moving
Additionally, the use of test data covering a large range of column and slab concrete strengths, column and slab reinforcement ratios, surrounding slab confinement, and wide range
Bayat considered the work on the steel braced frame structures equipped with ADAS devices under the far field record and in this study, which is an extension of the authors’
Several attempts to use interfaces for the modeling of masonry were carried out in the past decade with reasonably simple models; see Loureno (1994) for reference [8]. In
In this paper, static and free vibration analysis of carbon nano wires based on Timoshenko beam theory using differential quadrature method is investigated.. From the knowledge
In view of the above, a new finite element model has been developed in the present study for static analysis of composite skew shell panels using a simple higher order
The purpose of this paper is to present a finite element model for optimal design of composite laminated thin-walled beam structures, with geometrically nonlinear behaviour,