modelling and numerical simulation
DIELECTRIC AND ELASTIC RESPONSE OF PEROVSKITES: MODELLING AND SIMULATION
... [69] and other authors [70- 73] as a rigid body moving in a dissipative medium in a harmonic ...real and complex permittivity are obtained from the solution of this ...potential. Numerical ...
86
NUMERICAL MODELLING OF COMPOUND CHANNEL FLOW
... simulated and the distribution of mean primary velocity and the wall shear stress are also accurately ...robust and economic but are incapable of producing secondary ...flows and is ...
226
Numerical Methods and Tangible Interfaces for Pollutant Dispersion Simulation
... environmental and natural resources planning processes, which may incorporate development, parameterisation and visualization of environmental models such as pollutant dispersion simulations, making it ...
193
Numerical Modelling of Troposferic Ozone in Catalunya
... 7 and 8 compare the 3-day series of modelled ozone concentrations by UAMV with those observed at the six monitoring stations inside the ...7) and Granollers (G) (figure 6) stations were simulated well, as ...
12
Numerical modelling of large landslides stability and runout
... Abstract. Modelling of flow-like landslides is one of the possible approaches that can be used to simulate landslide instability and flow ...mechanics and associated with a versatile rheological ...
16
Determination of Volumetric Losses in Hydrodynamic Pump Using Numerical Modelling
... This paper deals with the numerical modelling of the flow in the single-stage centrifugal pump. The main objective is to determine leakage losses through annular seals at the suction side of the pump. ...
8
Numerical simulation of bolted connections
... the modelling of the components is SOLID186 ...square and present a central hole with diameter that corresponds to the diameter of the standard hole indicated by the AISC (2010) standard, bigger than the ...
15
Analytical and numerical modelling of damage and fracture of advanced composites
... distribution and size of the ...computer simulation of hard-core random fibre arrangement was then generated making use of those six parameters, creating fibre-rich and -poor regions which would have ...
316
Airborne Wind Energy Systems: Modelling, Simulation and Economic Analysis
... To optimize the ground area usage of a wind farm, the distance between units needs to be the minimum distance in which the units do not affect each others operation. In conventional wind parks, the spacing of wind ...
91
Lat. Am. j. solids struct. vol.11 número13
... mesh and the dissipate fracture energy converges to ...for modelling strain softening, some alternatives have been proposed such as: non-local modelling of the constitu- tive behaviour (Costa Mattos ...
16
Modelling and Simulation of Gas Engines Using Aspen HYSYS
... heating and power (CCHP) also known as trigeneration, is a fast growing technology for efficient and clean production of ...heating and cooling from one primary source [5, ...reliably and with ...
4
Airborne Wind Energy Systems: Modelling, Simulation and Trajectory Control
... dynamic simulation model, we develop a method to control the kite in order to follow a pre-defined path, based on a heading proportional ...) and is independent of the tether length and reel-out ...
89
UNIVERSIDADE DE BRASÍLIA FACULDADE DE TECNOLOGIA DEPARTAMENTO DE ENGENHARIA CIVIL E AMBIENTAL MICROSTRUCTURAL-BASED APPROACH TO THE INTERPRETATION OF CLAYS AND TRANSITIONAL SOILS
... samples and decides whether these samples were extracted from populations of the same average ...cracks and crystals on the ...equipment and by the same ...
162
Numerical simulation of "An American Haboob"
... variability, and the fact that this was the time with wind gusts that are not likely to coincide in time with model calculations, it is more difficult to obtain a credible conclusion about the wind field using ...
41
INSTITUTO SUPERIOR DE ECONOMIA E GESTÃO MESTRADO EM: GESTÃO DE SISTEMAS DE INFORMAÇÃO
... theory and posits three basic types of IS innovation, namely: Type I innovations, those confined to the IS task; Type II: those that support the business administration; and Type III, those that are ...
123
Numerical simulation of supersonic gap flow.
... paint and simple optics installed inside of a model, but the precision of it is still open to ...the simulation on compressible ...experimental and computational study of laminar cavity flows at ...
16
Analysis of bone damage during drilling processes
... tissue and the main constituent of the human skeletal ...rigidity and hardness ...automobile and motorcycle accidents, sports injuries, falls from a height, ageing population and others ...
207
GIS as a tool to aid pre- and post-processing of hydrodynamic models. Application to the Guadiana estuary
... processing and results visualization (Naoum, 2005; Merwade et ...coastal modelling due to absence of capabilities for handling large temporal 3D datasets and curvilinear and unstructured ...
145
Numerical simulation and parametric study of laminar mixed convection nanofluid flow in flat tubes using two phase mixture model
... tubes, and this factor reduces the thermal re- sistance of fluid flow and thus increases the amount of heat ...drop and friction factor to increase in these tubes, which is a negative ...transfer ...
14