Lat. Am. j. solids struct. vol.10 número3

The limitations of classical and first order shear deformation theories stimulated the develop- ment of higher order shear deformation theories, to include effect of

The fourth example investigates the maximization of fundamental frequen- cies of rectangular plates with central holes, where the structural response was obtained by

The stress values obtained in the dynamic analysis due to load mobility was used to evaluate the fatigue performance of the investigated composite bridge measured in terms of

In the present article, a pure boundary element method has been developed for bending analysis of functionally graded plates subjected to the transverse load. The material

In this paper, study is carried out to evaluate the effect of relative humidity of environment for a composite building using analytical prediction model,

It is obvious that 14.0 mm of porous absorber of GTR with the grain size <2.0 mm, vermiculite and EPS and consolidated with 12% binder concentration can yield the highest

Although models with 18 and 24 modes could excite the composite floor in all possible critical frequencies and reach the three possible main peaks of vibration (2.4Hz, 2.7Hz,

Based on these researches, the nonline- ar compressibility of the air and finite shock conditions were taken into account in the FE model, to investigate the dynamic response,