Lat. Am. j. solids struct. vol.11 número2
Texto
Imagem
Documentos relacionados
Next, matrix cracking was modeled by degrading the properties of the matrix and interfacial damage was modeled by introducing fric- tional cohesive surfaces on the bundle/matrix
The numerical results provide better insight into the effect of stiffener configurations on the nonlinear dynamic response of the stiffened plates subjected to
Latin American Journal of Solids and Structures 11(2014) 200 - 222 Figure 2 Ratio of the elastic modulus of the microcellular foam over the solid polymer elastic modulus as
The present methodology for the pre-sizing of reinforced panels under compressive loads is based on the synthesis of four stability criteria in the simple metamodel depicted in Fig.
The nanocomposite mass in the matrix changed the elastic properties of the plates and the coupling frequency mode moved inside the range of the experimental
Analysis of the results of numerical studies, obtained from relations (23), (24) and (25), as well as the supporting experimental tests, demonstrated that elastic deformations
temperatures. 4) Activation process of the SMA wires involved increase in the bending natural frequencies. This effect was intensified when both temperature and initial strains
The phase velocity, attenuation coefficient, normal stress, tangential stress, microrota- tion, microstress, temperature change, and mass concentration, specific loss