• Nenhum resultado encontrado

post-processing

Post-processing through linear regression

Post-processing through linear regression

... of post-processing of (ensemble) forecasts: classi- cal linear regression, total least-square regression, Tikhonov regularization, error-in-variable regression, geometric mean regression and best-member ...

14

Prediction of minimum temperatures in an alpine region by linear and non-linear post-processing of meteorological models

Prediction of minimum temperatures in an alpine region by linear and non-linear post-processing of meteorological models

... In the context of NWPs, it is useful to analyse which vari- ables can be considered most responsible for the systematic error in the raw output. Indeed, these are the only sources of error that can be reduced by ...

12

Post processing rainfall forecasts from numerical weather prediction models for short term streamflow forecasting

Post processing rainfall forecasts from numerical weather prediction models for short term streamflow forecasting

... uncertainty are critical for flood and short term ensemble streamflow forecasting. The raw output from numerical weather prediction models typically does not provide rainfall forecasts with these properties and therefore ...

42

GIS as a tool to aid pre- and post-processing of hydrodynamic models. Application to the Guadiana estuary

GIS as a tool to aid pre- and post-processing of hydrodynamic models. Application to the Guadiana estuary

... pre- processing through GIS interface included retrieval, manipulation, display, editing and export of model input data (bathymetry, water boundary, initial concentrations, boundary tidal elevation) containing in ...

145

Post-processing Techniques in Free Boundary Flows during Liquid Composite Moulding Processes

Post-processing Techniques in Free Boundary Flows during Liquid Composite Moulding Processes

... techniques. Post- processing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed ...

18

Region-Based Fractional Wavelet Transform Using Post Processing Artifact Reduction

Region-Based Fractional Wavelet Transform Using Post Processing Artifact Reduction

... It should be noted that fractional artifact on smooth area is more visible than area with very high details. Image "Bird" proves this, where higher artifact can be noticed on its face (highlighted by rectangle as ...

9

Bias correction and post-processing under climate change

Bias correction and post-processing under climate change

... linear post-processing are investigated when the system under interest is affected by model errors and is experiencing parameter modifications, mimicking the poten- tial impact of climate ...and ...

14

Sampling strategies and post-processing methods for increasing the time resolution of organic aerosol measurements requiring long sample-collection times

Sampling strategies and post-processing methods for increasing the time resolution of organic aerosol measurements requiring long sample-collection times

... Measurements with longer collection times still provide molecular- and functional-group-level information that are valuable for OA characterization (Corrigan et al., 2013). Therefore, to obtain diverse and detailed ...

18

POST-PROCESSING TECHNIQUES SUITABILITY FOR MESOLEVEL FREE BOUNDARY FLOWS

POST-PROCESSING TECHNIQUES SUITABILITY FOR MESOLEVEL FREE BOUNDARY FLOWS

... by post-processing the free-boundary normal velocities, resulting in superior conver- gence ...results. Post-processing a finite element solution is a well-known technique, which consists in a ...

11

Extended post processing for simulation results of FEM synthesized UHF-RFID transponder antennas

Extended post processing for simulation results of FEM synthesized UHF-RFID transponder antennas

... the post processor capa- bilities of the commercially available three dimensional field simulation programme Ansoft HFSS to compute an accurate solution of the antenna’s surface current ...

7

Automatic transcription of music using deep learning techniques

Automatic transcription of music using deep learning techniques

... and post-processing stage should be taken into account, in order to improve the whole performance of the ...the post-processing stage would aim at fixing errors in the original ...

116

Standard Positioning Performance Evaluation of a Single-Frequency GPS Receiver Implementing Ionospheric and Tropospheric Error Corrections

Standard Positioning Performance Evaluation of a Single-Frequency GPS Receiver Implementing Ionospheric and Tropospheric Error Corrections

... The aim of this paper was to evaluate the positioning performance of a single-frequency software GPS receiver using Ionosperic and Tropospheric corrections. We proposed an adaptive ILS algorithm, where we integrated ...

7

Studies on the biochemical and microbiological quality of infant formula post exposure to novel processing technologies

Studies on the biochemical and microbiological quality of infant formula post exposure to novel processing technologies

... during processing, C. sakazakii was still found in it, possibly due to post-processing contamination from the factory environment (Shaker et ...

124

A Distributed approach for antenna subset selection in MIMO systems

A Distributed approach for antenna subset selection in MIMO systems

... schemes and interference mitigation has been studied in [9], where a game-theoretic framework is used for a 2-cell scenario in downlink communication and each base-station (BS) aims at the maximization of its error ...

5

Braz. Dent. J.  vol.27 número4

Braz. Dent. J. vol.27 número4

... This case report aimed to highlight the usefulness of cone beam computed tomography (CBCT) and its post-processing tools for the diagnosis, follow-up and treatment planning of invasive cervical resorption ...

5

Four-dimensional noise reduction using the time series of medical computed tomography datasets with short interval times: a static-phantom study

Four-dimensional noise reduction using the time series of medical computed tomography datasets with short interval times: a static-phantom study

... Methods. Using base and quarter radiation doses for CCT (456 and 114 mAs/rot with 120 kVp), a static phantom was scanned ten times with retrospective electrocardiogram gating, and 4DNR with short interval times (50 ms) ...

14

EFFECTIVE 3D DIGITIZATION OF ARCHAEOLOGICAL ARTIFACTS FOR INTERACTIVE VIRTUAL MUSEUM

EFFECTIVE 3D DIGITIZATION OF ARCHAEOLOGICAL ARTIFACTS FOR INTERACTIVE VIRTUAL MUSEUM

... the advantage that no further texture mapping techniques are required. Per contra the main downside is unimpressive quality of the pictures. In our case, though, this has been considered suffi ciently good for the ...

8

Polishing of Ground Y-TZP Ceramic is Mandatory for Improving the Mechanical Behavior

Polishing of Ground Y-TZP Ceramic is Mandatory for Improving the Mechanical Behavior

... At the same time, our study shows that grinding before aging decreases the susceptibility to t-m phase transformation – this fact is more evident for post- processing treatments (polishing, glazing and heat ...

9

J. Microw. Optoelectron. Electromagn. Appl.  vol.10 número1

J. Microw. Optoelectron. Electromagn. Appl. vol.10 número1

... We analyzed the performance of several signal processing algorithms for optical DP-QPSK 112 Gb/s coherent receivers using the offline post-processing of experimental data. In particular, two systems ...

10

Carbonate Buildups in the Pernambuco Basin, NE Brazil

Carbonate Buildups in the Pernambuco Basin, NE Brazil

... seismic sequences, a set of 59 seismic lines was selected. This set represents the highest imaging quality available, with a total length of 4,339.5 km (Fig. 3). The selected seismic sections were used to perform a ...

17

Show all 4315 documents...

temas relacionados