Parametric study
PARAMETRIC STUDY OF REINFORCED CONCRETE PLANE FRAMES STRUCTURES THROUGH OPTIMIZATION
... Abstract. This work aimed the parametric study and cost optimization of reinforced concrete plane frames. To achieve these objectives, the total cost, composed by the costs of concrete, steel and formworks ...
10
Significance of Soil Compaction on Blast Resistant Behavior of Underground Structures: A Parametric Study
... a parametric study was performed using the Finite Difference Method (FDM) with Flac 2D code (Itasca Consulting Group, ...this study, represent the metro subway tunnels corresponding to Mashhad city, ...
14
Parametric study of a historical masonry building subjected to seismic loading
... The main goal of the thesis is to contribute in the validation and application of pushover analyses in the seismic assessment of historic masonry structures. To achieve this objective the thesis has been divided in two ...
208
Computerized Simulation of Automotive Air-Conditioning System: A Parametric Study
... a parametric study to investigate the effects of varying the volume flow rate of supply air, the number of occupants in the passenger cabin, the vehicle speed and the fractional outside air intake (XOA) on ...
8
Numerical simulation and parametric study of laminar mixed convection nanofluid flow in flat tubes using two phase mixture model
... The use of nanofluids is one of the most effective mechanisms of increasing the amount of heat transfer in heat exchangers. The use of flat tubes, in which the fluid flow has a lower thermal resistance, is another way of ...
14
Parametric Study of Single and Double Stage Membrane Configuration in Methane Enrichment Process
... this study, exhibit many advantages in comparison to other conventional method of biogas upgrading, including lower operation cost, easier maintenance and greater process flexibility, no need for chemicals, the ...
9
PARAMETRIC STUDY OF SWEETENING PROCESS OF SOUR GAS BY MOLYBDENUM OXIDE NANOPARTICLES
... At the optimum operational and dimensional conditions for cylindrical and spherical adsorbents, the initial driving force is not the process controller for the adsorption with the sph[r] ...
12
Efficiency in school education: a semi-parametric study of shool efficiency in OECD countries
... sense. Parametric methods have been dealing with this problem mainly through maximum likelihood estimation of stochastic frontiers, dividing the error term in inefficiency and random noise (Aigner et ...a ...
94
Parametric Study of Square Concrete Filled Steel Tube Columns Subjected To Concentric Loading
... This study presents on the behaviour of concrete-filled steel tube (CFST) columns under axial load by changing ...The study was conducted using ANSYS 13 finite element ...
4
Numerical analysis and parametric study of multilayered microchannel heat sinks
... experimental study on the per- formance of cooper multilayered MCHS, and their results indicated that the thermal resistance of heat sink decreases with the increase in layer number, but the decrease degree ...
10
Numerical Analysis of Piles in Layered Soils: A Parametric Study
... with parametric solutions of a pile with underlain model soil strata under the axial ...The study revealed that the increase in modulus of elasticity of pile improves the settlement resistance of the pile, ...
8
Parametric study and Analysis of Band Stop Characteristics for a Compact UWB Antenna with Tri-band notches
... The study and analysis of the band notching is discoursed in terms of current distribution and impedance plots to provide a greater and better perception into the working of the antenna and hence an equivalent ...
19
Parametric Study on a Horizontal Axis Wind Turbine Proposed for Water Pumping
... Abstract: Water pumping is considered an economically competitive sustainable process of providing water to communities, rural areas and livestock's. A parametric analysis on HAWT is carried out to explore the ...
4
Comparison and Parametric Study of Flameless Oxidation in a Gas Turbine Using Two Kinetics Mechanisms
... numerical study of turbulent, non-premixed, flameless combustion for SEV-combustor using the k-ε turbulence model, finite-rate-eddy-beak-up combustion model and the GRI mechanism of full ...
9
A parametric study of assembly pressure, thermal expansion, and membrane swelling in PEM fuel cells
... Kusoglu et al. [28] developed two-dimensional model to investigate the mechanical response of a PEM subjected to a single hygro-thermal loading cycle, simulating a simplified single fuel cell duty cycle. A linear, ...
26
Parametric Numerical Study of the Airflow and Thermal Performance in a Real Data Center for Improving Sustainability
... this study, CFD simulations of the thermal performance and airflow in a real existing data center processing facility with 208 racks were ...this study is air and it is modeled as an ideal gas with constant ...
30
J. Microw. Optoelectron. Electromagn. Appl. vol.16 número1
... Abstract — A microstrip leaf-shaped printed monopole antenna bioinspired on the Inga marginata leaves is presented in this paper for UWB applications. A parametric study of the proposed antenna bioinspired ...
11
J. Microw. Optoelectron. Electromagn. Appl. vol.16 número2
... achieve wide bandwidth. The advantage of structure shaped substrate is that it helps to reduce the overall size of the antenna with wide impedance bandwidth. The large space around the radiator is fully utilized by ...
15
Application of geometrically exact beam finite elements in the advanced analysis of steel and steel-concrete beam-columns
... a parametric study concerning the buckling resistance of concrete encased steel I-section beam-columns and (ii) an assessment of the lateral-torsional buckling behavior of wide flange steel I-section ...
18
Parametric and non-parametric indexes applied in the selection of sour passion fruit progenies
... This study aimed to compare parametric and non-parametric selection indices to be used in the selection of passion fruit progenies and identify the best economic ...
8