• Nenhum resultado encontrado

[PDF] Top 20 Role of plasticity-induced crack closure in fatigue crack growth

Has 10000 "Role of plasticity-induced crack closure in fatigue crack growth" found on our website. Below are the top 20 most common "Role of plasticity-induced crack closure in fatigue crack growth".

Role of plasticity-induced crack closure in fatigue crack growth

Role of plasticity-induced crack closure in fatigue crack growth

... Since in situ visualization of the near-tip deformations is hardly feasible in the places where the plane-strain situation is approached, computational simulation turns out to be the right way to ... See full document

8

Numerical Determination of Crack Opening and Closure Stress Intensity Factors

Numerical Determination of Crack Opening and Closure Stress Intensity Factors

... problem in using fracture mechanics concepts in designs seems to be the use of crack growth data in predicting fatigue ...and crack growth per cycle (da/dN). ... See full document

5

Effect of crack propagation on crack tip fields

Effect of crack propagation on crack tip fields

... components. Plasticity induced crack closure is intimately linked with the crack tip plastic deformation, which becomes residual as the crack ...effect of crack ... See full document

7

Matéria (Rio J.)  vol.15 número2

Matéria (Rio J.) vol.15 número2

... Fatigue crack growth mechanisms of long and small cracks were investigated in cast and wrought aluminum and titanium alloys with various microstructures (as-cast A535, 6061-T61, and ... See full document

11

Effect of Interrupted Ageing and Retrogression-Reageing Treatments on Fatigue Crack Growth with a Single Applied Overload in 7050 Aluminum Alloy

Effect of Interrupted Ageing and Retrogression-Reageing Treatments on Fatigue Crack Growth with a Single Applied Overload in 7050 Aluminum Alloy

... types of ageing heat treatment were performed: interrupted ageing and RRA ...mainly fatigue crack growth rate, and fracture processes in the low-moderate ΔK ...contribution of ... See full document

13

Lat. Am. j. solids struct.  vol.14 número2

Lat. Am. j. solids struct. vol.14 número2

... the fatigue lives under CA loading varies significantly from VA ...participation of the load sequencing or load interaction effects under VA loading affect the rate of fatigue crack ... See full document

15

J. Aerosp. Technol. Manag.  vol.5 número2

J. Aerosp. Technol. Manag. vol.5 número2

... new fatigue lifeing method, which uses the lead crack concept (Molent, Barter and Wanhill, 2011) within the safe life (SL) philosophy ...lead crack initiates upon entry into service and leads to ... See full document

8

Fatigue crack growth analysis of pre-strained 7475–T7351 aluminum alloy

Fatigue crack growth analysis of pre-strained 7475–T7351 aluminum alloy

... described in ASTM E 647 ...(R) of 0.5. This stress ratio was suggested to reduce the crack closure effect ...frequency of 30 Hz under room temperature conditions that ranged from 20 to ... See full document

9

EFFECT OF PRESTRAIN AND BAKE HARDENING TREATMENT ON THE FATIGUE CRACK GROWTH AND CRACK CLOSURE IN TWO DUAL-PHASE STEELS

EFFECT OF PRESTRAIN AND BAKE HARDENING TREATMENT ON THE FATIGUE CRACK GROWTH AND CRACK CLOSURE IN TWO DUAL-PHASE STEELS

... research, fatigue crack growth da/dN x ∆ K has been studied in two dual-phase steels broadly used in the automotive industry, with 7% to 12% of martensite volume ...one of ... See full document

5

Fatigue crack growth assessments in welded components including crack closure effects: Experiments and 3-D numerical modeling

Fatigue crack growth assessments in welded components including crack closure effects: Experiments and 3-D numerical modeling

... broadening of fatigue analyses of cyclic loaded structures while, at the same time, producing con- servative predictions of the fatigue life for several classes of struc- tural ... See full document

13

Mat. Res.  vol.8 número3

Mat. Res. vol.8 número3

... because of their high speciic strength and elastic ...excellent fatigue crack growth resistance when compared with that of the conventional 2000 and 7000 series ...alloys. In ... See full document

5

Fatigue Crack Growth Resistance and Crack Closure Behavior in two Aluminum Alloys for Aeronautical Applications

Fatigue Crack Growth Resistance and Crack Closure Behavior in two Aluminum Alloys for Aeronautical Applications

... because of their high specific strength and elastic ...excellent fatigue crack growth resistance when compared with that of the conventional 2000 and 7000 series ...alloys. In ... See full document

5

Mat. Res.  vol.15 número4

Mat. Res. vol.15 número4

... After the tests, the broken surfaces were examined under scanning microscope, at different magnifications varying from 200 to 10000 to identify and quantify different fractographic features. A method for quantitative ... See full document

5

Matéria (Rio J.)  vol.21 número4

Matéria (Rio J.) vol.21 número4

... reduction in tensile strength on weathered polypropylene ...observed in another study [7] the presence of brittle layers on polyvinyl chloride (PVC) and Nylon 6,6 weathered specimens which exhibited ... See full document

12

Mixed-Mode Crack Growth in Wood

Mixed-Mode Crack Growth in Wood

... defined, in order to obtain a stable mixed-mode crack growth ...geometry of specimen retained for experimental test is illustrated in ... See full document

7

Mat. Res.  vol.10 número2

Mat. Res. vol.10 número2

... life in these ...factor of about 7 for both AW and WH joints as R OL was increased from ...improvement in the fatigue behavior of the welded joints, upon increasing the intensity ... See full document

7

Lat. Am. j. solids struct.  vol.14 número1

Lat. Am. j. solids struct. vol.14 número1

... industries in the use of adhesively bonded weight efficient structures using aluminium joints were the ones that developed surface treatments, notably Boeing who patented the phosphoric acid anodising (PAA) ... See full document

14

Mat. Res.  vol.9 número3

Mat. Res. vol.9 número3

... the crack surfaces from the notch tip to the end of the ...or in the optical microscope unless the specimens were ...sites in the crack wake. A rub- ber-bridging site close to the ... See full document

10

Crack mode and life of Ti-6Al-4V under multiaxial low cycle fatigue

Crack mode and life of Ti-6Al-4V under multiaxial low cycle fatigue

... system of this testing machine becomes more complicated than those in common used testing machines since three hydraulic actuators must be controlled simultaneously and independently by employing a test ... See full document

11

Veins improve fracture toughness of insect wings.

Veins improve fracture toughness of insect wings.

... accumulation of smaller cells, in particular the remigium (see Figure 3 ...located in the centre of the ...correlation of wing cell size with distance to the ...edge of the wing ... See full document

9

Show all 10000 documents...