[PDF] Top 20 Comparing the Performance of Ground Filtering Algorithms for Terrain Modeling in a Forest Environment Using Airborne LiDAR Data
Has 10000 "Comparing the Performance of Ground Filtering Algorithms for Terrain Modeling in a Forest Environment Using Airborne LiDAR Data" found on our website. Below are the top 20 most common "Comparing the Performance of Ground Filtering Algorithms for Terrain Modeling in a Forest Environment Using Airborne LiDAR Data".
Comparing the Performance of Ground Filtering Algorithms for Terrain Modeling in a Forest Environment Using Airborne LiDAR Data
... aim of this study was to evaluate the performance of four ground filtering algorithms to generate digital terrain models (DTMs) from airborne light detection ... See full document
10
Airborne laser scanning for terrain modeling in the Amazon forest
... Misclassification of the ground returns commonly results in errors in the final DTM (Stereńczak and Kozak ...distribution of the elevation sample, the ... See full document
9
FEATURES AND GROUND AUTOMATIC EXTRACTION FROM AIRBORNE LIDAR DATA
... aim of the research has been the developing and implementing an algorithm for automated extraction of features from LIDAR scenes with varying terrain and coverage ...applies ... See full document
6
A comparison between bivariate and multivariate methods to assess susceptibility to liquefaction-related coseismic surface effects in the Po Plain (Northern Italy)
... applied in liquefaction studies at site scale to evaluate the factor of safety against liq- uefaction of a vertical soil ...amount of site-investigations in order to be applied ... See full document
20
Separating mixtures of aerosol types in airborne High Spectral Resolution Lidar data
... (2003). The pseudo Angstrom exponent they use likewise is related to the backscat- ter color ratio we use, but not ...with the goal of producing mixing ratio equations in a very sim- ... See full document
41
Modeling of Two-Stage Solidification: Part II Computational Verification of the Model
... In the work we assume that the first stage of solidification is the same for both modified and unmodified ...Thus, the same dendritic nucleation density is used in both ... See full document
6
Processing and performance of topobathymetric lidar data for geomorphometric and morphological classification in a high-energy tidal environment
... through the processes of filtering, water sur- face detection and refraction correction for all the individual swaths, the lidar points of all swaths were ...combined. ... See full document
21
Synthesis Of Arts In Architecture Of Uzbekistan Of The Ancient Period
... decoration in Airtam "the sculpture with the busts of musicians, gift-bearers was subjected to the unified principle of division of the entire space into ... See full document
8
A PERFORMANCE COMPARISON OF OVERSAMPLING METHODS FOR DATA GENERATION IN IMBALANCED LEARNING TASKS
... behalf of the practitioner by using assessment metrics which are not suitable for evaluating classifiers working on imbalanced data in order to find an optimal ...because of ... See full document
28
Selection Of High Performing Geometry In Flexure Bearings For Linear Compressor Applications Using Fea.
... As per Phase I final report published by Peckham Engineering and Tool, Manhattan Beach, CA with Phillips Laboratory, Kirtland Air Force Base, New Mexico in the name of ‗Precision Linear Flexure ... See full document
4
Retrieval of aerosol optical depth in vicinity of broken clouds from reflectance ratios: case study
... June, the 24-h average dry SSA associated with particles less than 10 µm in diameter was ...while the wet SSA was nearly 0.96 (Fig. 4). Absorption data from the ACRF Central Facility ... See full document
17
Design and Performance Evaluation of Combined Adaptive Beamformer and Rake Receiver for WCDMA Uplink
... In this paper a simple adaptive beamforming receiver is developed for WCDMA uplink ...from the reviewed 2D-Rake receiver structures as it propose a cascade of low-complexity reference signal based ... See full document
8
Modelling above-ground carbon dynamics using multi-temporal airborne lidar: insights from a Mediterranean woodland
... Frank, D., Reichstein, M., Bahn, M., Frank, D., Mahecha, M. D., Smith, P., Thonicke, K., van der Velde, M., Vicca, S., Babst, F., Beer, C., Buchmann, N., Canadell, J. G., Ciais, P., Cramer, W., Ibrom, A., Miglietta, F., ... See full document
34
Characterisation of the surface morphology of an alpine alluvial fan using airborne LiDAR
... fans of alpine torrents are both natural deposition areas for sediment discharged by floods and de- bris flows, and preferred sites for agriculture and ...tification of flow processes and their potential ... See full document
11
Modeling the reflection of Photosynthetically active radiation in a monodominant floodable forest in the Pantanal of Mato Grosso State using multivariate statistics and neural networks
... reflection of PAR was calculated for the dry period. The medians corresponding to the studied heights were compared by a Kruskal- Wallis one-way analysis of variance (Sokal and Rohlf ... See full document
9
The Prediction Approach for Periodontitis Using Collaborative Filtering Method in Big Data
... results in major damage to the soft tissue and bone that support the ...teeth. In the worst cases, teeth are ...Gingivitis The longer plaque and tartar are on teeth, the ... See full document
5
Corrigendum to "Airborne hydrogen cyanide measurements using a chemical ionisation mass spectrometer for the plume identification of biomass burning forest fires" published in Atmos. Chem. Phys., 13, 9217–9232, 2013
... In the manuscript “Airborne hydrogen cyanide measure- ments using a chemical ionisation mass spectrometer for the plume identification of biomass burning forest fires”, four au- thors we[r] ... See full document
1
Liquefaction susceptibility assessment in fluvial plains using high-resolution airborne LiDAR data: the case of the 2012 Emilia earthquake sequence area (Italy)
... improvement in mapping with respect to conventional available topographic data and/or aerial imagery. These results have significant implications for accurate hazard and risk assessment as well as for ... See full document
27
Estimating Energy Conservation Potential Of Local Metal Casting Units In Uganda Using Data Envelopment Analysis
... that the foundry industry puts into consideration environmental protection as well as energy efficiency and conservation whilst contributing to the economic development of the ...improvement ... See full document
7
Modeling and Analysis of Queuing Systems in Banks A case study of Ghana Commercial Bank Ltd. Kumasi Main Branch
... sight of many banks in Ghana. The obvious implication of customers waiting in long and winding queues could result to prolonged discomfort and economic cost to them; however increasing ... See full document
4
temas relacionados