Boundary element method
Dynamic stationary response of reinforced plates by the boundary element method
... the boundary element method has been pre- sented to analyze the stationary dynamic behavior of the reinforced panel ...into boundary-only integral ...varied boundary conditions and ...
18
Buckling Analysis of Laminated Anisotropic Kirchhoff’s Plates via The Boundary Element Method
... In this work we present numerical results for the problem of anisotropic Kirchhoff plates with the action of compressive and shear in-plane forces combined with an out-of-plane perturbation. The critical loads for ...
23
An inverse model for locating skin tumours in 3D using the genetic algorithm with the dual reciprocity boundary element method
... Element Method, to obtain the temperature distribution at the skin ...The Boundary Ele- ment Method (BEM) is a numerical technique that requires only discretization of the boundary thus ...
21
Computing the Acoustic Field of a Radiating Cavity by the Boundary Element - Rayleigh Integral Method (BERIM)
... rect boundary integral equation for the interior region to the Rayleigh integral for the mouth of the domain and the exterior ...usual boundary element method (BEM) and Rayleigh integral ...
6
Lat. Am. j. solids struct. vol.14 número7
... Due to their robustness in handling the inherent singularity diffi- culties associated with crack analysis, mesh-reduction methods present an avalanche of formulations in the literature which, some- times, entails ...
25
Lat. Am. j. solids struct. vol.8 número3
... appropriate method to model the coupling of an actuator and host structure, it is not so effective when the size of the piezo- device and the host structure are very different as shown in ...infinity, ...
30
Análise elastoplástica da propagação de trincas pelo método dos elementos de contorno
... - Single-domain boundary element method for 3D elastostatics crack analysis using continuous elements - International Journal for Numerical Methods in Engineering 39, 1265-1293, 1996..[r] ...
171
J. Braz. Soc. Mech. Sci. & Eng. vol.33 número4
... Numerical simulation of engineering problems has reached such a large scale that the use of a parallel computing approach is required to obtain solutions within a reasonable time. Recent efforts have been made to ...
8
Lat. Am. j. solids struct. vol.13 número16
... the Boundary Element Method (BEM) has been applied to solve problems related to fluid-solid media subjected to seismic ...the Boundary Elements (Dominguez and Gallego ...special ...
23
Lat. Am. j. solids struct. vol.9 número2
... the Boundary Element Method (BEM) and the Finite Ele- ment Method (FEM) in order to create a computational code for the analysis of geometrical nonlinear 2D frames coupled to layered ...
24
Lat. Am. j. solids struct. vol.14 número6
... The INSANE environment is an open source software implemented in Java, an OOP language. It is composed of three main applications: pre-processor, processor and postprocessor. The pre- and post- processor are interactive ...
23
Lat. Am. j. solids struct. vol.10 número3
... direct boundary element method based on Green’s identity, Gospodinov and Ljutskanov [10] investigated the static analysis of thin rectangular ...indirect boundary element method ...
22
Constructing efficient substructure-based preconditioners for BEM systems of equations
... the boundary element method (BEM) is derived from the exact boundary-integral representation of problem solutions, in closed or open domains, accounts for the following advantages: high ...
10
J. Braz. Soc. Mech. Sci. & Eng. vol.34 número2
... Section III provides a brief description of the Boundary Element Method, discusses the numerical model used in this work, and presents its validation based on the[r] ...
6
Lat. Am. j. solids struct. vol.13 número7
... finite- element boundary-element (FE-BE) method to solve the coupled water-plate ...expansion method. Yoon et al. (2014) proposed a direct coupling method to analyze floating ...
20
Sensitivity analysis of 3D frictional contact with BEM using complex- step differentiation
... differentiation method applied to a parameter sensitivity analysis for 3D elastic contact ...the Boundary Element Method (BEM) using discontinuous elements and the Generalized Newton ...
17
APPLICATION OF BOUNDARY INTEGRAL EQUATION METHOD FOR THERMOELASTICITY PROBLEMS
... Two-dimensional time-harmonic dynamic coupled thermoelasticity analysis by boundary element method formulation // Engineering Analysis with Boundary Elements.. Sladek V., S[r] ...
14
ANALYSIS OF STRENGTH OF BRITTLE MATERIALS UNDER DIFFERENT STRAIN RATES USING LDEM SIMULATIONS
... finite element method (FEM) and boundary element method (BEM), to solve a problem where a fracture could ...finite element formulation (Moes and Belytschko, 2002) should be ...
20
Computations of the flow past a still sphere at moderate reynolds numbers using an immersed boundary method
... Kim et al. (2001) have performed some experiments using Mohd-Yusof's methodology for domains discretised by the finite volume method. The authors have added source and sink terms to volumes overlapped by the ...
9
J. Braz. Soc. Mech. Sci. & Eng. vol.25 número4
... of boundary element methods ...solve boundary value problems using boundary element ...this method is restricted to two- dimensional problems ...
9