[PDF] Top 20 Lat. Am. j. solids struct. vol.13 número10

... Pimenta, P.M. , Campello, E.M.B., (2003) . A fully nonlinear multi-parameter rod model incorporating general cross- section in-plane changes and out-of-plane warping. Latin American Journal of Solids and ... See full document

... The comparison of results from the pullout process modeling is demonstrated in Figure 13. It is clear that the constant-  model causes large discrepancies and the model of considering the inter- face shear as a ... See full document

... Li, G. Q., Wei, J. B., Zhang, K. Y., (2011). Theoretical and experimental study for cable tension estimation by vibration method accounting for flexural stiffness and flexibility support. China Civil Engineering ... See full document

... Using this artificial neural network, designed for many different projectile masses and exit velocities, the amount of muzzle displacement that occurs when different types of ammunitio[r] ... See full document

... nia, USA, 2015), a commercial software package. The loading conditions used in computer simula- tion were meant to represent the procedures stated in conducting the Brazilian test, as represented in Figure 3 . For that, ... See full document

... Numerical simula- tion and Constructal Design method applied to the study of the cutout shape Influence in the mechanical behavior of perforated plates subjected to buckling. In: Procee[r] ... See full document

... The springback angle predictions with the model parameters obtained by the optimization of both cyclic and V-die bending simulations are found to mimic the experimental results in a b[r] ... See full document

... The current investigation showed that in specific applications, such as the transport of an etha- nol reservoir by a crane using a special truss lifting system attached to the tank throu[r] ... See full document

... In the case of cantilever Timoshenko beams, we investigated the effects of rotary inertia and shear deformation as well as the influence of design parameters such as the slenderness rat[r] ... See full document

... For those layered specimens in which the two layers are made of the same materials with the same shades, such as (CA1-CA1 or NA1-NA1 or HA1-HA1), the hardness of only one layer is show[r] ... See full document

... .; Enzler, H.; Müssig, J., 2016). All the conducted studies showed a dramatic effect for the fibers type, alignment, length, and processing parameters on the composite performance (Lu, 2002). This research shows a ... See full document

... Based on the theories of thermal elasticity and nonlocal elasticity, Chang (2012) developed an elastic Euler-Bernoulli beam model for the thermal-mechanical vibration and buckling inst[r] ... See full document

... Bhattacharya, J., (1969). The possibility of the propagation of Love waves in an intermediate heterogeneous layer lying between two semi-infinite isotropic homogeneous elastic layers. Pure and Applied Geophysics ... See full document

... The results of experimental tests and numerical simulations, as well as the collapse shapes of the models, showed that the expanded metal tubes can be used as energy absorbers in the i[r] ... See full document

... Zuo (2013) introduced object-oriented graphics interface design and optimization software for cross- sectional shape of automobile body, which can be used at the conceptual phases of aut[r] ... See full document

... In the present hybrid FE algorithm, the linear combination of Green’s function of isotropic seepage governing equation is employed to construct the element interior water head field b[r] ... See full document

... of Solids and Structures is composed of 6 selected articles among those presented at the 10th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2016), which was held in Split ... See full document

... potential are calculated considering calculated yield stresses and r-values corresponding to the equivalent plastic strain values starting from 0.001 to 0.301 at each 0.002 increment. F[r] ... See full document

... The finite element analyses carried out on the case study column allowed evaluating the influence of rocking and sliding on its dynamic response, as well as assessing its remarkable vul[r] ... See full document

... To predict the occurrence of plastic instability in the studied sheet metals during forming processes, a theoretical criterion, based on the loss of ellip- ticity of the macroscopic gov[r] ... See full document